Product Details
Adhesive Hardener for Footwear

Adhesive Hardener for Footwear (Similar to RFE)

Item no.: TPUA-E33D

  • Key features：
    - Similar to RFE
    - NCO: 7.2 ± 0.2% by weight
    - Appearance: clear yellow to brownish liquid
    - Enhance the bonding strength of adhesive
    - Increase the heat resistance of adhesive
Add to inquiry cart

Product Introduction

Description
The light-color TPUA-E33D (similar to RFE) is an established, universal curing agent for adhesive based on hydroxyl polyurethane, natural and synthetic rubber. TPUA-E33D can be used instead of TPUA-13-F25G . RFE is even more satisfactory from the aspect of industrial hygiene.
Application
After the addition of TPUA-E33D, the ready-to-use double-component adhesive should be applied within a period (pot life) which is determined not only by its content of rubber but also by the other ingredients of the formulation (e.g. resins, antioxidants, solvents, etc.) If the adhesive is not used within this period, it may become increasingly difficult to apply and its viscosity increases rapidly until irreversible gelling ultimately occurs.
Typical Properties
Chemical composition Contains 27% thiophosphoric-tris-(p-isocyanato-phenyl ester) and 73% ethyl acetate
Appearance Clear yellow to brownish liquid
NCO content, % by weight 7.2±0.2
Solubility Soluble in acetone, toluene and methyl ethyl ketone and aromatic solvents
Storage stability Reacts readily with moisture; for the best performance it should be kept dry and stored at temperatures between 5℃ and 32℃
Compatibility With Solvents
Adhesive hardener for footwear TPUA-E33D can be diluted with anhydrous and alcohol-free ethyl acetate dichloropropane, trichloroethylene, acetone, methyl ethyl ketone, toluene, and other solvents. The addition of relatively large proportions of aliphatic hydrocarbons can cause turbidity; but the solution of natural rubber in aliphatic hydrocarbons shows good compatibility with TPUA-E33D, in the absence of other solvents.
Performance
Adhesive hardener for footwear TPUA-E33D shows good bonding strength in PVC with much plasticizer, SBR with plenty of oil, coating leather, silk and so on.
Suggested Additions
For curing adhesive of 100 parts by weight (p.b.w.) based on:
Graft - Chloroprene rubber (Rubber content approx. 16%) 3-5 p.b.w. TPUA-E33D
Chloroprene rubber (Rubber content approx. 20%) 5-7 p.b.w. TPUA-E33D
Hydroxyl polyurethane (Rubber content approx. 15%) 3-5 p.b.w. TPUA-E33D
Package
A. each 0.75 kg in an aluminum bottle.
    each 20 bottles in standard carton.
B. each 180 kg in each iron drum.
Notice: These values are based on the test of our present laboratory test specimens.
Taiwan PU Corporation is a professional adhesive hardener for footwear manufacturer, adhesive hardener for footwear producer. We supply high quality adhesive hardener for footwear products, have an experienced technical team and offer the best price to adhesive hardener for footwear.

Adhesive hardener for footwear is called polyisocyanate hardener for footwear, shoe adhesive hardener, footwear adhesive hardener, crosslinking agent for adhesive, crosslinking agent for glue. If adhesive hardener for footwear is needed, please contact us.

Related Products

PU Hardener (Similar to RN)

  • Original price：$
  • Price：$

Hardener for Adhesive (Similar to RC)

  • Original price：$
  • Price：$

Hardener for Footwear Adhesive (Similar to RE)

  • Original price：$
  • Price：$
TOP
Copyright © Taiwan PU Corporation All Rights Reserved.